深圳市万塑源橡塑有限公司
形态:颗粒型号:N2200G43类型:正牌料特性:玻纤增强 高刚性 高强度 脱模性好产地:德国备注:当天发货用途:注塑用加工方式:注塑
热性能
THERMALUltraform® N 2200 G43单位
UNIT测试方法
TEST METHOD
使用温度(short cycle operation)
Maximum operating temperature110℃
热变形温度(1.8 MPa,未退火)
Hot deformation temperature161℃ISO 75-2/A
熔融温度
Melting temperature168℃ISO 11357-3
线性热膨胀系数(MD:23~55℃)
Linear coefficient of thermal expansion5.0E-51/℃ISO 11359-2
电气性能
ELECTRICALUltraform® N 2200 G43单位
UNIT测试方法
TEST METHOD
介电强度
Dielectric strength85kV/mmIEC 60243-1
体积电阻率
Volume resistivity1.0E+14ohms·cmIEC 60093
相对电容率(1 MHz)
Relative permittivity4.10 IEC 60250
相比漏电起痕指数(解决方案 A)
Compared to the leakage tracing index600VIEC 60112
耗散因数(1 MHz)
Dissipation factor7.0E-3 IEC 60250
表面电阻率
Surface resistivity1.0E+14ohmsIEC 60093
信息
Ultraform® N 2200 G43单位
UNIT测试方法
TEST METHOD
ISO Type
ISO TypePOM-K, M-GNR, 02-003, GF20 ISO 9988-1
汽车材料(> 1.00 mm)
Automotive materialsPassed FMVSS 302
机械性能
MECHANICALUltraform® N 2200 G43单位
UNIT测试方法
TEST METHOD
拉伸应变(断裂)
Tensile strain3.0%ISO 527-2
拉伸强度(断裂)
tensile strength115MPaISO 527-2
拉伸模量
Tensile modulus7200MPaISO 527-2
拉伸蠕变模量(1000 hr)
Tensile creep modulus4500MPaISO 899-1
球压硬度(H358/30)
Ball hardness164MPaISO 2039-1