TMF系列中频逆变直流点(凸)焊机

TMF Series Medium Frequency Inverter DC Spot welding Machine

特点及用途：

1、通电时间短、热效、可有效抑制焊接飞溅、获得稳定高品质的焊接效果，焊接成型美观。

2、控制精度高，中频点焊机由于工作频（通常在1-4KHz），使得反馈控制精度是一般交流点凸 焊机和次级整流点凸焊机的20-80倍，相应的输出控制精度也非常高。

3、逆变点焊机采用三相输入，宜于电网供电平衡，无须电力补偿设备，对电网无干扰。

4、由于热效、焊接变压器小、铁损小，焊接同样的工件比交流点焊机和次级整流点焊机节能可达30%以上。

5、特别适合于导电率较高的铜、铝和镀锌金属等材料，焊接效果良好，尤其适合于三层板焊接、非常薄的材料的焊接以及精密焊接的要求。

Main Features:

1.Current time is short, high thermal efficiency, which can effectively inhibit welding spatter, stability of high quality welding effect, beautiful welding forming

2.Control precision is high, intermediate frequency spot welding machine due to the high working frequency (usually in 1-4 KHZ), the feedback control precision is general ac point convex welder and secondary rectifier point convex welder 20-80 times, the corresponding output is also very high control precision.

3．Inverter spot welding machine adopts three-phase input, like the balance of power supply, no power compensation equipment, no interference of power grids

4.Energy saving: due to the high thermal efficiency, small welding transformer, welding inverter and small iron loss, welding the same artifacts, than ac spot welding machine and secondary rectifying spot welding machine and energy saving can reach more than 30%

5.Wide applicability: can welding materials such as copper, aluminum, and galvanized metal, welding effect is good.Three layer board is especially suitable for welding, welding material is very thin, and the requirements of precision welding

主要技术参数 Main Technical Parameter

参数/型号 Parameter/model	TMF-50KVA	TMF-90KVA		TMF-150KVA	TMF-170KVA	TMF-250KVA		TMF-300KVA
额定电源 Rated/Voltage	3相，交流电（AC），380------415-----480V，50/60HZ
额定容量 Rated/Capacity	50KVA	90KVA		150KVA	170KVA	250KVA		300KVA
额定占截率 Rated Duty Cycle	50%	50%		50%	50%	50%		50%
较大焊接电流 Max Welding Current	18500A	23500A		32000A	40500A	56500A		80000A
电极行程 Electrode Stroket	75MM				100MM
电极臂间距 Welding Arm Spacing	260MM				320MM
气源压力 Air Source Pressure	0.6MPa
冷却水流量 Cooling Water Flow	16L/Minute		25L/Minute		35L/Minute		45L/Minute

欢迎来到深圳市宝安区通骏机械设备商行网站， 具体地址是广东深圳宝安区和一新村A区401栋，负责人是余强。
联系手机是19925822618, 主要经营主要生产交直流点焊机、储能点焊机、电阻对焊机、闪光对焊机、缝焊机、全自动龙门丝网焊机、全自动冰箱网片及小型网片生产线、洗手盆生产线、自动环缝焊/直缝焊工装、铁线弯框机、全自动二维/三维铁线成型机、铁线调直切断机、网片修边机、。
单位注册资金单位注册资金人民币 100 万元以下。